apple Lisa 2 Upgrade Kit 1983 free download

File name Lisa_2_Upgrade_Kit_1983.pdf

Lisa 2 Upgrade Kit Customer Instructions Installation and Data Transfer 029-OS05-A Lisa 2 Ungrade Kit Customer Instructions The following procedures describe the process of loading the Lisa 2 software on a Lisa 1 that has been upgraded to a Lisa 2. Before continuing, be sure you have completed the items on the following checklist. Have you: 1) Received your update to the Workshop? Language product (Workshop, Pascal, Basic, COBOL) versions that ran with orfice System 1.0 will NOT be compatible with this new release of the Office System. Those who have purchased the language products should order an update to them before installing this upgrade. 2) Loaded your documents to the ProFile? You should have loaded the documents you wish to save on ProFile before bringing your system to the dealer for installation of the retrofit hardware. If you are performing the retrofit yourself) the procedure for saving your documents is described in appendix 1 at the end of this docurrent. This process takes anywhere from ten minutes to tVJlO hours, depending on the arrount of data you wish to save. 3) Had the upgrade hardware installed? The dealer typically performs this part of the upgrade. If you have received this kit without access to a dealer t you can perform the upgrade following the procedures in appendix 2 at the end of this document. This process takes about one-half hour. 4) Purchased enough micro diskettes to contain the documents you wish to save? The procedure requires that the user purchase enough microdiskettes to carry all of the customer's data files saved on the ProFile. This would be a maximum of eight for each ProFile; two are included with the kit. Once you have completed these steps, continue with the software installation instructions on the following page. 029-0S0S-A Page 1